On equipment filtration range
This filtration range does not replace OEM filters, as it will compromise your warranty.
They are additional pre-filters to ensure your OEM filters are not compromised on capacity and ensure the efficiency of OEM standard fitted filters. They allow OEM filters to function in ideal conditions.
The iCerMax™ ceramic filters extend your economical lifecycle of engines and equipment due to the inherent characteristics that ceramic filtration offers. The iCerMax™ is a “Bulldog “when it comes to Africa’s contamination levels.
It is widely accepted that the additional cost of implementing these filters, will be recovered via: the longer economical lifecycle of equipment, less equipment failure and your fuel bill variance alone will pay the associated costs, due to less internal engine wear and extended combustion efficiency
iCerMax™ Duo system
Particle and water contamination in fuels
An ideal pre-filter for particle and water contamination in various harsh environments. Complete contamination buster.
- Utilises iCerMax™ depth ceramic medium for particle contamination and a coalesce water separator.
- Guards against “third party” diesel, where no control on cleanliness levels from bulk fuel tanks exists
- Highly cost effective for superior filtration.
- Easy to fit
- Used on all types of equipment, trucks or gensec’s
- Three filters in the DUO range
- Flow rates from 1.2 l/m, 3.7 l/m, Up to 681 l/h = 11.35 l/m
Used on all types of equipment, yellow goods, trucks, bakkies or gensec’s
iCerMax™ DUO -Coalesce Duel Water Separator “The Bulldog” and Why visible inspection of diesel fuel is important.
The coalesce principle is utilized – a reliable, proven and effective method. Highly effective water separation is achieved without the cost of expensive cartridges that collapse with a high volume of water concentrate and whose efficiency is compromised by particle contamination, OR where the water absorption simply exceeds the water holding capacity.
“New market concept“ Filter to be utilised in virtually any diesel application – flow rate up to 3.8 litre per minute for diesel engines up to a 4 litre capacity.
The filter is totally revolutionary as it offers a complete contamination free solution to address fuel contamination, both particles (Ceramics) and water it is a highly effective mythology in a single pass and offers unequivocal benefits in comparison with current market offerings.
The main focus will be on “bakkies”, forklifts, and refrigeration engines, marine and other diesel engines up to four litre capacity with a fuel flow rate of up to 3.8 litres per minute.
This filter concept has been around for several years, but because of the problem of how to truly address water contamination in a very limited space it was not brought to fruition. ICerMax™ did not want to launch just a normal filter, but wanted to launch something truly special both in its functionality and its application in multiple areas and a filter that the end users would gladly convert to.
Key points of the design that offers market distinction (unique to this iCerMax™ filter) :
– Particle contamination addressed by ceramic depth media
– Water contamination addressed by iCerMax™ coalescing
Functionality of design:
– Unit virtually totally constructed from plastics – marine and underground applications
– See through clear plastic bowl to allow inspection of visible water detection
– Large water bowl reservoir with drain plug and nut plug for water sensor
– Unit size compact and multi-functional
– Ease of cartridge change
– Visual inspection of all contamination levels ( key to functionality perception )
– Visual inspection of fuel quality
Water Separation Technology on our new onboard Filtration range
Any Diesel engine smaller than 4.0, four cubic or the “Bakkie diesel filter”
Launch in April 2014
It is advised to fit an iCerMax™ bulk combo unit to the bulk fuel tanks and the iCerMax DUO on the equipment – The end result is lower operational costs all-round, and a multi stage filtration approach, which leads to effective, sustainable filtration. It is expensive to create bottle neck filtration and then to rely on filters with black hole characteristics.
Technical Specification Sheet
Related Documents
- Comparison table (PDF)